17 • Schlage • CT5000 user guide
Programming legend
Symbol
Description
[Programming code] Five-digit code, identical to programming credential code listed in the
credential types table.
Programming Card Programming card, identical to programming credential card listed in
the credential types table.
[CODE]
An identifier assigned to a specific function of the electrified locking
hardware.
[PIN]
Three- to six-digit code (default PIN length is six digits). A PIN can be
any of the PIN code types listed in the Credential Types table. A PIN
entered before a card credential becomes the Credential Reference
Number.
Asterisk key on the keypad
-
Number keys on the keypad
Manual programming commands
L
Keep a log of programmed credentials and users, with functions and PIN numbers.
L
Commands are confirmed by five blinks of the green DEBUG LED and the reader’s
green LED will blink.
L
The reader’s red LED will blink to indicate an incorrect entry. To interpret blink
patterns, refer to page 20.
Function
Press/Present
Confirmation
1
Change
[Programming Code]
[Programming Code]
OR
Programming Card
Wait for
green LED to
stop blinking
between each
step.
New [Programming Code]
New [Programming Code]
Change
Programming Card
[Programming Code]
OR
Programming Card
Wait for
green LED to
stop blinking
between each
step.
New Programming Card
Add Normal Use
Credential
[Programming Code]
OR
Programming Card
Wait for
green LED to
stop blinking
between each
step.
New [PIN]
(for PIN only)
OR
New Card
add another credential
OR
to finish
Add Normal Use
+PIN Credential
[Programming Code]
OR
Programming Card
Wait for
green LED to
stop blinking
between each
step.
New [PIN]
New Card
add another credential
OR
to finish
1 Other lights may show before the final confirmation. Wait for the final confirmation before continuing to the next step.