Scheppach hms 2600ci, Руководство пользователя

Страница: 14 / 88

16 english
Trouble shooting
To repair faults, switch off the machine. Pull power plug.
Problem Possible Cause Relief
Irregular and discontinuous transport
at the thickness planing Thickness desk not free of resin or not
free of oil. Clean and spray (sliding spray) the
thickness desk regularly. This is valid
especially for wet and resinous woods.
Workpiece shoulder at the planing This is due to badly adjusted planer
knives. The adjustment of the planer knives
has to be carried out with a lot of care
with help of the adjustment gauge.
Workpiece inaccuracy at the planing
(concave, convex) At not exactly parallel standing
trimming desks due to improper
transport or similar. Adjust the stiff trimming desk 1 mm
above the planing shaft body, as well
as parallel to the bottom plate.
Electrotechnical maintenance only by electric specialists!
At waste disposal of the machine all the local legal regulations have to be kept.