www.scheppach.com /
+(49)-08223-4002-99 /
+(49)-08223-4002-58
GB | 27
15. Troubleshooting
Problem
Possible cause
Help
Motor doesn’t start
a) ON/OFF switch damaged.
b) ON/OFF cable damaged.
c) ON/OFF relay damaged.
d) Fuse blown.
e) Motor burnt.
a-d) Replace all damaged parts before you use
your machine again.
e)
Contact your local service centre. Every at
-
tempt to carry out a repair, can be danger-
ous if it is not done by skilled personnel.
Machine gets slower
during work.
Too much pressure put on the
workpiece.
Reduce the pressure on the workpiece.
Sanding belt comes
off the drive pulleys.
Belt does not run straight.
Reset the track.
The wood gets burnt
during sanding.
a) Sanding disc or belt covered
with grease.
b) Excessive pressure on work-
piece.
a) Replace disc or belt.
b) Reduce pressure on workpiece.
