Scheppach 5901309903, Перевод оригинального руководства по эксплуатации

Страница: 29 / 36


www.scheppach.com

service@scheppach.com

+(49)-08223-4002-99

+(49)-08223-4002-58
29 І 36
Please provide the following information in the event of
any enquiries:
• Type of current for the motor
•
Machine data - type plate
•
Motor data - type plate
Troubleshooting
Problem Possible Cause Help
1. Saw blade gets
loose after turning
off the motor
Fastening nut tightened insufficiently Tighten fastening nut
2. Motor does not start a) Failure mains fuse a) Check the mains fuse.
b) Extension cable defect b) Change extension cable
c) Connections to the engine or
switch out of order
c) Have it checked by an electrician
d) Connections on the motor or switch
defect
d) Have it checked by an electrician
3. Motor reverse
rotation
a) Capacitor defective a) Have it checked by an electrician
b) Incorrect connection b) Then switched by a qualified electrician polarity of the
wall socket
4. Motor does not
perform, the fuse
responds
a) Cross section of the extension
cable insufficiently
a) see electrical connection
b) Overload by dull saw blade b) Change saw blade
5. Burns on the cutting
surface
a) dull saw blade a) Change saw blade
b) Wrong saw blade b) Change saw blade