Scheppach 19013 04901, Перевод из оригинального руководства

Страница: 22 / 80

22 english
Push-stick
Fig. "H"
Secure the 2 holding brackets on the long stop.
each with
1 oval head screw
B 4,2 x 9,5
Insert the push-stick into the holding brackets.
When cutting narrow workpieces lengthwise (i.e. smaller than
120 mm) it is essential to use the push-stick).
Parallel fence
Fig. "I"
Adjusting the reading microscope
Adjust the fence against the saw blade and clamp the
eccentric levers
(1 + 2). Release the fastening screws of the
reading magnifier; position the hairline precisely over the Zero
line of the scale. Retighten the fastening screwa.
Fig. "J"
Fine-adjustmen
Fine adjustment is with the adjusting spindle
(3) while the
eccentric lever
(1) is locked, and the eccentric lever (2) is
open.
Suction hood
Fig. "K"
Screw the saucer-head screw M 6 X 40 with washer and lock
lever into the suc- tion hood. Clamp the suction hood securely
on the riving knife.
Suction hood „1“ without scorer
Suction hood „2“ with scorer
IMPORTANT!
The suction hood must be lowered onto the workpiece
for each new job.
Fig. "H"
Fig. "I"
Fig. "J"
1
2
Fig. "K"