Scheppach 19013 04901, Перевод из оригинального руководства

Страница: 18 / 80

18 english
• For using the machine not as intended, the manufacturer
will not take any liabilities
• The machine is designated for commercially use
Rernaining hazards
The rnachine has been built using modern techno- logy in
accordance with recognized safety rules. Some rernaining
hazards, however, may still exisi.
• The rotating saw blade can cause injuries to fingers and
hands if the work piece is incorrectly fed.
• Thrown work pieces can lead to injury if the work piece
is not properly secured or fed, such as working without a
limit stop.
• Noise can be a health hazard. The perrnitted noise level
is exceeded when working. Be Sure to wear personal
protective gear such as ear protection.
• Defective saw blades can cause injuries. Regularly
inspect the structural integrity of saw blades.
• The use of incorrect or damaged mains cables can lead
to injuries caused by electricity.
• Even when all safety measures are taken, some remaining
hazards which are not yet evident may still be present
• Remaining hazards can be rninimized by following the
instructions in
,,Safety Precautions“, ,,Proper Use“ and in
the entire operating manual.
Scope of delivery
Circular saw bench Precisa 6.0 - partly assembled
Sawblade Ø 315
Long fence
Crosscut / mitre gauge
Riving knife
Dust extractor hood
Dust extractor accessories
Suction connection piece
Push-stick
Push-grip
Assembly too
Holding mandre
Assembly accessories (accessory pack)
Operating instructions
scorer saw blade Ø120 (only 1901304903/1901304904)
Accessories
Model No.
Sliding table carriage 1400 5463 0701
Sliding table carriage 2000 5463 0702
Sliding table carriage 1400 5463 0703
Sliding table carriage 2000 5463 0704
Hingle arm 5463 0705
Fence rail 1350 extendible 5320 8180
Wheel base 5300 0705
Table width extension foldable 5463 0706
Table length extension 79017 00701
SUVA suction attachment 5460 1100
Table insert and collar nut for
adjustable grooving cutter
5463 0707
Adjustable grooving cutter 7231 0709
(only allowed to use in correspondece with
SUVA-suction attachment)
clamping fence cpl. rightside 7939 0301
fence rail 1500 5300 0077
automatic switch-on
mechanism ALV 2
7910 4010
automatic switch-on
mechanism ALV 10
7910 4020
Acessory sawblades
Only install Original scheppach sawblades!
Model Nr.
Special sawblade 6310 4101
Hardened metal sawblade for coated furniture boards
Dimensions:
Total
Ø mm 250
Bore Ø mm 30
No. of teeth 80 Z
sawblade 5100 5556
Universal trimming blade hardened metal teeth for long
and cross cuts in wood and chip board.
Dimensions:
Total
Ø mm 315
Bore Ø mm 30
No. of teeth 48 WZ
sawblade 5100 5504
Universal trimming blade hardened rnetal tipped for long
and cross cuts in solid wood.
Dimensions:
Total
Ø mm 300
Bore Ø mm 30
No. of teeth 48 WZ
sawblade 5100 5507
Universal TCT sawblade for length and cross cuts in solid
wood.
Dimensions:
Total
Ø mm 300
Bore Ø mm 30
No. of teeth 72 Z