Scantronic 8136UK-50, Инструкция по установке и эксплуатации

Страница: 23 / 44

496339 Issue 4 23 of 44
Programming Zones
Z01: A C O D T
NA 2 N Y N N
ZONE TYPE
AREA No.
ZONE No.
ATTRIBUTES
C = CHIME
O = OMIT ALLOWED
D = DOUBLE KNOCK
T = TEST
Y = ACTIVE
N = INACTIVE
ZONE AREA
Figure 11. The Zone Display for Menu 32
Zone Types . You assign each detector a zone type so that the control panel
can give the appropriate response. Types include, for example, normal
alarms, 24hour alarms, fire alarms and several others.
Zone Attributes . You can further modify the way the control panel responds
to each zone by assigning a zone attribute. For example, the “chime” at-
tribute allows you to program the panel to sound a chime tone every time a
particular detector is triggered.
Areas . Each Area is a set of detectors in the same physical area. The 8136
can use up to eight Areas. You assign detectors to an area during program-
ming.
Levels . A Level is a group of Areas that can be set or unset at the same
time. Each Level can be thought of as a different level of security. The 8136
provides up to four Levels, labelled A, B, C and D. Each Level can have its
own Exit Mode, Entry and Exit Times, Alarm Response, and Re-Arm Re-
sponse. LEDs on the keypads show the status of each Level.
Flexi-Zone ® . A Flexi zone is a zone type that can be used whenever you
want a zone to change type according to the Level of setting in use. Since an
Area can belong to more than one Level, and each Level can have different
entry/exit routes, then a zone with type Final Exit at one Level may need to
be a Normal Alarm at another Level. You can program a Flexi-Zone to be one
of the types Normal Alarm, Final Exit, Not Used or Entry Route for any Level
in which it appears.
Partition. A Partition is a collection of one or more Areas operating together
as an independent alarm system. The 8136 can use up to four Partitions.
Each Area can belong to only one Partition, and a Partition must have at
least one Area. You cannot program a Level to set Areas from more than one
Partition, however a user can be assigned to more than one Partition. Parti-
tions can be used to restrict access to parts of the system.
8136 Factory Defaults