Scanjet BIO 10, Инструкция по эксплуатации

Страница: 19 / 40

#BIO10 11 – 140813 Page 19 of 40
12. Remove the vertical gear and gear shaft in the same way.
13. If needed, change the bearings (pos. 20, 23) for the gear shafts and turbine
shaft, by carefully pressing them out. To withdraw the bearing (pos. 30), turn
the gearbox upside down and use a fi tting tool through the little hole in the
bottom the press out the bearings.
20
32
30