Scanjet BIO 10, Инструкция по эксплуатации

Страница: 13 / 40

#BIO10 11 – 140813 Page 13 of 40
7. Maintenance
7.1. Preventive maintenance
In order to keep your Scanjet tank cleaning machine servicing you as an effi cient
tool in your tank cleaning operations, it is essential to care for maintenance.
Following a simple maintenance program will keep your tank cleaning machine
in good condition and the machine will maintain its high performance.
The following recommended preventive maintenance program is based on tank
cleaning machines working in average conditions. However, a cleaning machine,
which has a rough and dirty job to do, will need more frequent attention than
one working in ideal conditions. It is recommended that the maintenance
program is adjusted to suit such a situation.
Only use proper tools when servicing the machine; see chapter “16. Tool Kit”
for Scanjet standard tool kit. Never use excessive force or hammer components
together or apart. Always follow all assembly/disassembly steps in the order
described in this manual. Never assemble components without previous cleaning;
this is especially important at all mating surfaces. Work only in a clear well lighted
working area.
Good maintenance is careful and regular attention!
NOTE! Timely replacement of bearings will prevent costly damages to
the gears. However, all bearing bushes, made from high performance
PEEK (PolyEtherEtherKetone) material, are mounted with a press-fi t
and should not be removed unless they need to be replaced.
Using any other than Scanjet original parts will invalidate
the warranty.