Scanjet BIO 10, Инструкция по эксплуатации

Страница: 15 / 40

#BIO10 11 – 140813 Page 15 of 40
7.3. Service intervals
Every 600 Working Hours
1. Order the service kit for 600 hours service “KIT BIO10-600”
2. Thoroughly fl ush the machine prior to disassembly and ensure that no
particles remain in the machine.
3. Disassemble machine as described on the following pages.
4. Upon complete disassembly of the machine, all parts should be thoroughly
washed and/or degreased in the appropriate manner, then inspected
accordingly.
5. Inspect seals, bushings and gears for wear; locate position numbers from
“10. Exploded Drawing View - BIO 10” on page 25. Replace if unduly worn.
6. Reassemble the machine. A service card is included with this manual; see
page 34. This should be completed each time service is performed on the tank
cleaning machine so that a proper maintenance record/history is kept.
Every 1200 Working Hours
1. Order the special service kit for 1200 hours service “KIT BIO10-1200” or “KIT
BIO10-2-1200”
2. Do the same inspection as for 600 hours above.
3. Replace the parts in the service kit. Check all parts for wear, replace if
necessary.