30
SCAIME Manual : NU-eNod4B-ETH-E-236708-D.docx
net measurement.
factory calibrated measurements
A single measurement is transmitted per rising or falling edge (depending on the configured logic) on the input signal.
9.2.6
Measurement window
This is only possible using
standard or fast SCMBus
.
The request can apply to:
Gross measurement.
Net measurement.
Factory calibrated measurements.
While the input is kept at the right level, a series of measurements are transmitted at the period defined by the
‘sampling
period’
setting. Only input 2 is operational if both inputs are assigned to
9.2.7
Sensor input control
The assignment of logical input to sensor input control function allows performing special procedure to diagnose load cell
sensor input. Beforehand, user must acquire reference value of the load cell input by sending '
Sensor input control reference'
specific command (e.g. after the device is calibrated).
Note:
Load cell sensor input control must be realized if no process cycle is in progress.
9.3
Functions attached to an operating mode:
See corresponding sections for a complete description.
L
o
a
d
t
input
Measur.
Fig. 7
Fig. 8
L
o
a
d
t
input
output
period
Measur.
