SBC SBC-368, Руководство пользователя по установке и эксплуатации

Страница: 44 / 53

43
If you are entering an unregistered handset
number, “INVALID NUMBER” is display and you
need to repeat the above step again.
The handset you called rings and “TRANSFER
FROM BS” on the display. Press [Talk] or [Spk.]
on the called handset, the call will be connected
automatically.
If the handset you called does not answer in 20
seconds, the unanswered call will ring back to you
again.
Press [Talk] or [Spk.] to pick up the call again, or
the line will be release automatically after 20
seconds if you do not answer.
CALL CONFERENCING
SBC 368 cordless system supports conference calls with one handset and base unit.
When engaging an external line, press [Talk] or
[Spk.] on another handset or press [Speakerphone]
on the base unit to enter a conference call.
“CONFERENCE” appears on the display of the
base unit. Press [Talk] on one handset or
[Speakerphone] on the base unit will only end that
party from the call. To end the call, make sure all
parties have disconnected from the line and
returned to standby mode.
Note:
This phone system can allow you to conference or intercom by using the handset
and base simultaneously. If the handset is operated too close to the base unit,
you may experience feedback noise. Should this occur, move the handset away
from the base unit and the feedback will stop.
INVALID NUMBER
EXIT
TRANSFER FROM BS
EXIT
PHONE ON
SERVICE DIR. DIAL V.M
PHONE ON
SERVICE DIR. DIAL V.M
CONFERENCE
.
M U LT I - H A N D S E T O P E R AT I O N