42
SBC 368 provides a multiple handset capability which supports up to 8 handsets.
Each additional handset comes with a charger you can plug into any electrical outlet.
No extra phone jack is required.
It is possible to make an internal call between two handsets while another handset is
engaging the external line
INTERCOM
SBC 368 base unit can support 4 groups of intercom conversation simultaneously if
you have 8 handsets in your system. Handset-to-Handset two-way intercom is
operated independently of the base unit.
When the Handset 1 is in standby mode, press [Int.],
LCD display shows “EXTENSION #:?”
Key in the number of the handset (1,2…8) or base (0)
you want to call. For instance, if Handset #2 is being
paged, LCD display shows “PAGING #2”
The handset being called will ring and the display
shows “PAGING FROM # 1”.
Press [Int.] on the called handset to answer the
intercom.
Press [EXIT] to terminate the intercom.
Note:
This phone system can allow you to conference or intercom by using the handset
and base simultaneously. If the handset is operated too close to the base unit,
you may experience feedback noise. Should this occur, move the handset away
from the base unit and the feedback will stop.
CALL TRANSFER
SBC 368 cordless system allows you to transfer calls from Base to Handset,
Handset to Handset, or Handset to Base.
When the handset is engaging external line. Press
[Int.] and followed by the number of the handset
you want to transfer the call to.
EXTENSION #:?
SAVE MENU SERVICE DIR. DIAL V.M.
PAGING #2
EXIT
PAGING FROM #1
EXIT
EXTENSION #:?
EXIT
.
M U LT I - H A N D S E T O P E R AT I O N
Содержание SBC-368
Страница 10: ...9...
Страница 51: ...50 NOTES...
Страница 52: ...51 NOTES...
Страница 53: ...52 SBC3681HS 20030913...