SBC SBC-368, Руководство пользователя по установке и эксплуатации

Страница: 32 / 53

31
FLASH
Call Waiting
1. Use [Flash] for accessing Call Waiting service. For example, if you receive a
second call during your initial call, press [Flash] to put the first call on hold to
answer the waiting call.
2. After you finish a private talk with the second caller, press [Flash] to return to the
first caller.
Note: If you also have conference Calling service, press [Flash] to allow the first
caller enter into a conference call.
Conference Calling
1. Use [Flash] for accessing Conference Calling service. For example, while on a
call, press [Flash] to put the initial call on hold and to obtain a new dial tone to
make a second call.
2. After finished a private talk with the second caller, press [Flash] to add the first
caller into a conference call.
Note: If you do not have Conference Calling service, press [Flash] can hang up from
a call and obtain a new dial tone
PAUSE
The [Redial] key allows you to add a 2-second pause in a phone number
sequence during pre-dialing or storing number in the Phone Book Directory.
Enter a Pause in Dialing Sequence
To add a 2-second pause, press [Redial] at the desired position when you are
creating or editing a phone number and “
P ” appears on the display. For a longer
delay, press [Redial] additional times.
Note: Remember, the phone number you wish to store cannot have more than 32
digits, including a pause. The “ P ” counts as one digit.
DIALING MODE: PULSE TO TONE
If your telephone line uses pulse dialing (such as for a rotary dial phone), you can
temporarily override the Pulse Mode setting with the Tone Mode until the unit goes
back on-hook. This may be necessary to access certain special services such as
bank-by-phone service:
1. Use pulse dialing to call the service.
2. When the service answers, press [*].
3. Follow the normal procedure for the special service you are using. Any
additional numbers you dial are sent as tone signals.
4. When you hang up, the telephone returns to pulse mode.
Note: The temporary tone can be saved in memory and can be executed in
normal dialing, redialing or Directory dialing.
A D VA N C E D O P E R AT I O N