background image

47 AltiTouch Plus User Guide 

Operator is not available and to leave a message in 
the Operator’s mailbox. 
 
To activate this feature, press #39. When it’s active, 
you can deactivate it also by pressing #39. 

Outside Call Blocking 

You can block access to all outside lines by pressing 
#38.Pressing#38 a second time restores the system to 
its normal outside calling status. 

Additional Phone Features 

Emergency Service Feature 

The AltiTouch will provide telephone service during 
a power failure. However, only the dial pad, ringer 
and handset will function. If you are on a handset call 
during a power interruption, the Model 390 will keep 
the call, although the display will not work while the 
power is off. Handsfree calls will not be reestablished 
during a power interruption. 

Using the directory 

The Directory can store up to 200 names and 
numbers, which are displayed in alphabetical order. 
Tip: Store all your Directory contacts the same way, 
either first name first, or last name first. This will 
make it easier to find names and numbers. 

Adding a name and number to the 
Directory 

1. 

Press the Directory button 

 

Содержание AltiTouch Plus





































































Отзывы: