Sayson AltiTouch Plus Скачать руководство пользователя страница 10

Страница: 10 / 68

AltiTouch Plus User Guide 10

3. Connect the cords

If you attached the stand to install the phone on a
desk,

route both the phone cord and power adapter

cord through the opening in the stand. Insert the
phone cord into the slot on the back of the telephone

marked

until it clicks into place. Insert the power

cord into the power jack marked

Note:

You

should connect the power adaptor to a surge protector
or power bar.

4. Press the cords into the grooves

Press the cords into two of the grooves provided on
the bottom the stand. This will allow the stand to sit
flat on a desk surface.

5. Install the phone

If you have installed the stand and are using the
phone on a desk:

Simply turn the telephone over so it rests on the
stand. Connect the phone cord to a phone jack and
plug the power adapter into a power outlet.

Содержание AltiTouch Plus





































































Результаты поиска

Содержание AltiTouch Plus

Отзывы:

Похожие инструкции для AltiTouch Plus

Бренды по названию

Популярные бренды

Sayson AltiTouch Plus, Руководство пользователя

Результаты поиска

Содержание AltiTouch Plus

Отзывы:

Похожие инструкции для AltiTouch Plus

Бренды по названию

Популярные бренды