Sawn Craft Zero 32 Manual
4/18/16
5
2.2 Fuselage Components Assembly
Parts Required:
o
Horizontal Fuselage Nose, Middle, & Tail
o
Upper Vertical Fuselage Nose, Middle, & Tail
o
Lower Vertical Fuselage Nose & Tail
o
3mm Long Gusset Halves
1)
Using Foam-Tac, glue the Horizontal Fuselage Nose, Middle, & Tail pieces together to form the
completed Horizontal Fuselage.
2)
Glue the Upper Vertical Fuselage Nose, Middle, & Tail pieces together to form the completed
Upper Vertical Fuselage.
3)
Glue the Lower Vertical Fuselage Nose & Tail together to form the completed Lower Vertical
Fuselage.
4)
Glue the one 3mm Long Gusset half to its mating other half to form a completed 3mm Long
Gusset. Repeat this process for the other 3mm Gusset halves.
Attach here after
removed from sheet
