Sawn Craft Zero 32 Manual
4/18/16
2
Sawn Craft recommends the use of Beacon Foam-Tac adhesive for the construction of this model due
to its strength, light weight, and easy use. Foam-Tac can be purchased by visiting the
tab on
1.3 Required Parts for Completion
The list below contains the tested and recommended parts for your model:
Sawn Craft FYF Completion Kit - Large
o
Hextronik 24g 1300kv motor
o
10A Brushless ESC
o
4x 5g Servos
o
6-Channel Receiver (Optional)
o
8”x4” Electric Prop
o
JST Female Pigtail
o
Shrink tube, etc.
Velcro
Please note that other power systems and components may be compatible and may work without
issue, but the listed components have been used successfully by Sawn Craft.
The order of assembly presented in this instruction has been tested and it is recommended that you
do not differ from them to provide the most accurate and easiest assembly possible. Also, the
construction techniques of many of our aircraft are extremely similar. Though we will try to include
as many photos of your specific kit in this instruction, other kit assembly photos may be used if the
instruction and “look” of the assembly is the same.
