Sawn Craft Zero 32 Manual
4/18/16
11
2.7 Electronics Installation
Parts Required:
o
24g Brushless Motor
o
10A ESC
o
4+ channel Receiver
o
4x 5g Servos
o
2x 40cm servo extensions
The power and radio components you select to install in your Front Yard Fighters kit will likely be similar
to the below photo. Don’t forget that you can buy the
Front Yard Fighter Completion Kit -Large
includes all of the necessary electronics to get your kit in the air without having to piece them together
yourself.
1)
Since we mount the rudder and elevator servos in the tail, 40cm servo extensions will be needed to
connect to the receiver, located near the wing spar. If you install a four-channel receiver, you'll
need a Y-cable to drive the ailerons from one receiver channel. If you install a six-channel receiver, a
Y-cable is not needed, as the aileron servos can plug directly in to AIL and AUX channels on the
receiver, and are mixed in the transmitter.
2)
Assemble the pair of aileron servos, with control arms, adjustment hardware, and control linkage
hardware. Locate the servos so the control linkage is aligned and fix in place with a spot of foam
glue. Once the glue is cured, trim the control wire if it is too long.
