sauter RDT410, Руководство пользователя

Страница: 10 / 36

SAUTER flexotron®400 - RDT410
Installation and wiring
P100012103 10
Terminal Designation Operation
- LS 24 V~
RDT410F201 only
- MM
-
LS 230 V~
RDT410F301 only
MM
1 DI2 Digital input
2 DI+ Reference for DI1 and DI2
3 DI1 Digital input
4 UI+ Reference for UI1
1 DI2 Digital input
2 DI+ Reference for DI1 and DI2
3 DI1 Digital input
4 UI+ Reference for UI1
5 UI1 Universal input Ni1000 or Digital
6 Reference for AI1
7 AI1 Ni1000 temp. Sensor input
8 Reference for AI2
9 AI2 Ni1000 temp. Sensor input
10 SPI Input Ni1000 setpoint device
11 AO2 0...10 V= output
12 AO1 0...10 V= output
13 Reference for AO1 and AO2
14 DO2 Digital output
15 DO1 Digital output
16 GDO Reference for DO1 and DO2
17 NC
DO3
Relay
230 V~
5 A
18 NO
19 COM
4.2.1 Supply voltage
RDT410F301: 230 V~ +10%, -15%, 50/60 Hz. 6 VA
RDT410F201: 24 V~ ±15%, 50/60 Hz. 6 VA
If the RDT410 (24V supply model only) and actuators connected to it share
transformer, it is essential that the same transformer-pole is used as reference
for all the equipment. Failure to do so will prevent the equipment from
functioning as intended and may also lead to damages.