4
Align the stack of fanfold paper
to the factory-imprinted line
that is visible when the back
cover is laid down flat.
Setting fanfold paper
2
Remove the screw to the back
cover.
Keep the screw so that it will
not be lost.
3
Tilt the back cover as shown in
the figure.
Load the fanfold paper up to
20 cm or less.
1
Lift up the main cover.
Do as described in Step 1 of “Setting roll paper.”
When placing the fanfold paper behind the printer
Back cover screw
Back cover
Back cover
Fanfold paper
Back cover
12
サトー取説_E 04.8.17 6:22 PM ページ 12
