Screwdriver for adjusting
the volume
▲
Operation panel
Icons, operation messages, and error messages are displayed.
LED
The status of the printer is shown.
POWER
Lights up when the power is on.
ONLINE
Lights up when communication
is available. Flashes when
communication fails.
STATUS
When an error occurs, it lights
up and flashes. When the printer
is receiving/sending data, the
Status LED flashes.
LABEL
When a paper error occurs, this
indicator lights up and flashes.
RIBBON
When a ribbon error occurs, this
indicator lights up and flashes.
・ ・ ・
Operation buttons
The status of the printer is shown.
FUNCTION
With each setting mode, you
can return to the mode selection
screen.
In each setting mode, values are
input, and the cursor moves.
ENTER
Confirms the choice of a
selection or value.
CANCEL
Cancels printing data. In each
setting mode, you can return to
the previous setting item.
Display
Icons, operation messages, and error
messages are displayed.
LINE button
For switching between start/stop of printing and
on/off of data receiving/sending.
FEED button
For feeding of paper. When it is pressed once,
equivalent of a sheet of paper is sent out.
*There are times when the paper is not aligned to
the proper position, such as when the power is
turned on or the paper is set. At this time, always
press the FEED button to align the paper to the
proper position.
Adjustment volume
Volume for service adjustment.
Unless otherwise specified, do
not change it.
Buzzer volume
For buzzer volume adjustment
PITCH
For adjusting print position
OFFSET
For adjusting the stop
positions of the cutter, peeling,
and tear off.
DARKNESS
For adjusting printing density.
6
サトー取説_E 04.8.17 6:21 PM ページ 6
