4
Check that the knob of the
ribbon winding unit is pushed
to the back.
Set the paper.
Do as described in 3 to 6 of “Setting roll paper.”
6
5
Pass the carbon ribbon from the ribbon feeder under the printer head to the
ribbon winding unit. Affix the carbon ribbon directly to the grip sheet that is on
the ribbon winding unit, and wind it several times in the direction of the arrow.
Check from sideways that the carbon ribbon is set according to the figure
below.
Carbon ribbon
Grip sheet
Printer head
• Immediately after printing, the printer head and the surrounding area are hot. When
you replace the paper immediately after printing, be careful not to burn yourself.
• If you touch the edge of the printer head with bare hands, you may be injured.
Caution
Knob
19
サトー取説_E 04.8.17 6:22 PM ページ 19
