9
8
10
Loosen the label guide knob, and adjust the slide guide so that it lightly touches
the edge of the paper, and fasten the label guide knob tightly.
Turn the head close lever
(purple / CLOSE ) in the
direction of the arrow, and
close the printer head.
Close the printer head tightly
until it locks.
Pass the paper under the label guide and paper sensor.
When the knob of the label damper is pulled forward, the label damper will
return to the original position.
• Immediately after printing, the printer head and the surrounding area are hot. When
you replace the paper immediately after printing, be careful not to burn yourself.
• If you touch the edge of the printer head with bare hands, you may be injured.
Label guide knob
Head close lever
Printer head
Label damper
Paper sensor
Label guide
Caution
1
3
2
14
サトー取説_E 04.8.17 6:22 PM ページ 14
