background image

Caution

Caution

• Do not operate the power switch or 

handle the power cable with a wet hand. 
Operating or handling with a wet hand 
may cause electric shocks.

• Do not put heating equipment close to the 

power cable. Otherwise, the coating of 
the power cable may melt and cause a fire 
or electric shocks.

• When pulling out the power cable from 

the outlet, be sure to hold the plug. 
Pulling it out by holding the power cable 
may result in exposure of the cable 
conductor or disconnection, and cause a 
fire or electric shocks. 

• When opening/closing the cover, beware 

of getting your fingers caught. Also, hold 
the opening/closing cover well so that it 
may not slip and fall.

• After printing, the printer head is hot. 

When replacing paper or cleaning 
immediately after printing, be careful not 
to burn yourself. 

• Touching the edge of the printer head 

may cause injuries. When replacing paper 
or cleaning, be careful not to hurt 
yourself. 

• Beware of injuries, burn injuries, or 

electric shocks when replacing the printer 
head.

Power supply

Power cable

Cover

Printer head

• When opening/closing the printer head, 

be careful not to catch any other foreign 
objects but paper. It may cause injuries or 
damage to the printer.

• When setting the roll paper, be careful not 

to catch your fingers between the paper 
and the feed.

• Be careful not to hurt yourself when 

detaching the back cover of the fanfold 
through hole and attaching it. 

• Simplified cutter is structured as a blade. 

Be careful not to cut yourself.

 

• If the printer is not used for extended 

periods of time, disconnect the power 
cable for safety.

• When maintaining or cleaning the printer, 

first disconnect the power cable for 
safety.

Opening/closing the printer head

Setting the paper

During extended periods of non usage

Simplified cutter

Maintaining/cleaning

1

) 

2

) 

3

) 

 

4

) 

 

Reproduction of a part or the whole of this manual without permission is prohibited.

The content of this manual may be changed without prior notice.

The content of this manual has been prepared with utmost care, but if you find any suspicious points, 

errors, or omissions, please contact the sales outlet or dealer from which you bought the product.

This equipment is a Class B information technology equipment based on the standards of the Voluntary 

Control Council for Interference by Information Technology Equipment (VCCI). Although this equipment 

is for use in home environment, if it is used close to a radio or television set, it may cause poor 

reception. 

Handle it properly in accordance with the content from the instruction manual.

サトー取説_E  04.8.17 6:21 PM  ページ c

Содержание GT4e




























Отзывы: