24 INT-TSG
SATEL
later or even will not be displayed at all (e.g. when the service menu is open). The following
information can be displayed on the status screen:
– any text defined by the installer,
– partition status by means of symbols (select individual partitions whose status will be
displayed),
– zone status by means of symbols (select individual zones whose status will be
displayed),
– output status by means of symbols (select individual outputs whose status will be
displayed),
– date and time (particular elements, such as day, month, year, hour, minutes and
seconds are to be configured individually),
– keypad name,
– zone status by means of messages (select individual zones whose status will be
displayed, and define the content and color of messages for normal state and for
violation, because only these two states are presented in the form of message),
– output status by means of messages (select individual outputs whose status will be
displayed, and define the content and color of messages for active and inactive output).
There are three font sizes available for use on the status screen. You can also define color of
the font to be used. Using the “drag and drop” method, you can easily select the place where
the given information will be presented on the display.
Slide show
The keypad can display a slide show (as the status screen background and after 10 minutes
of the keypad inactivity). The photos to be displayed should be stored on a microSD memory.
Their size should not exceed 480 x 272 pixels. Only images in BMP format are supported.
The C
HANGE PICTURE EVERY
parameter defines how fast the images will be changed during
the slide show. If the time equal to 0 is programmed, no slide show will be displayed. If this is
the case, the first picture stored on the microSD card will be displayed as the status screen
wallpaper.
8. Updating the keypad firmware
1. Write the file with new version of firmware to a microSD card.
2. Tap
on the main screen. The “Advanced” screen will be displayed.
3. Tap
. The terminal will be displayed.
4. Enter the
service code
(by default: 12345) and tap
. The user menu will be
displayed.
5. Start the service mode:
INTEGRA / INTEGRA Plus: tap
,
VERSA / VERSA Plus: tap in turn
.
6. Hide the service mode:
INTEGRA / INTEGRA Plus: start the H
IDE
SM
NOW
function (
SM
SETTINGS
H
IDE
SM
NOW
) (
SM
SETTINGS
H
IDE
SM
NOW
),
VERSA / VERSA Plus: start the A. H
IDE
SM
NOW
function (
0.
S
RV
M
OD CONFIG
A.
H
IDE
SM
NOW
).
7. The status screen will be displayed.