SATEL INT-TSG
11
7.1.2 State inspections
Fig. 5. D
LOAD
X program: “State inspections” tab.
1 – zone state
[Zones] – if this option is enabled, you can inspect the zone state without
entering the code:
– after tapping
on the “System status” screen,
– after tapping and holding for 3 seconds
on the terminal.
4 – partitions armed
[Partitions] – if this option is enabled, you can inspect the partition state
without entering the code:
– after tapping
on the “System status” screen,
– after tapping and holding for 3 seconds
on the terminal.
5 – alarm events memory
[Alarms log] – if this option is enabled, you can view the alarms
log without entering the code:
– after tapping
on the “System status” screen,
– after tapping and holding for 3 seconds
on the terminal.
6 – trouble memory
[Troubles log] – if this option is enabled, you can view the troubles log
without entering the code:
– after tapping
on the “System status” screen,
– after tapping and holding for 3 seconds
on the terminal.