SATEL INT-TSG
23
Photo frame
– if this option is enabled, the following will be displayed after 10 minutes of
keypad inactivity:
slide show
– if there are at least two pictures on the memory card and the value of
C
HANGE PICTURE EVERY
parameter is different from 0,
clock
– if there are one or no pictures on the memory card or the value of C
HANGE PICTURE
EVERY
parameter is 0.
If this option is disabled, the screen will go blank after 10 minutes of keypad inactivity.
7.2.2 Status screen
The status screen related data are stored in the keypad memory. Before you start
configuring the status screen, click on the “Read” button in the “Status screen” tab to
read the data from the keypad. Having configured the status screen, click on the
“Write” button in the “Status screen” tab to write the data to the keypad. The status
screen related data are not read after clicking on the
button or saved after
clicking on the
button in the D
LOAD
X program main menu.
Fig. 11. D
LOAD
X program: “Status screen” tab (keypad connected to VERSA / VERSA Plus
control panel).
The status screen is displayed automatically after the keypad is idle for 60 seconds. This rule
does not apply if the terminal is running. In such a case, the status screen may be displayed