background image

The  GPRS-T1  converter is a  device  dedicated for use in  intruder  alarm systems  for the 
purpose of reporting and messaging via the GSM networks.  The event codes received in 
the telephone format  can be  converted to the form transmittable with the use of GPRS 
technology or to the SMS message format. Using the GPRS technology makes it possible 
to send the codes to the STAM-2 monitoring station or SMET-256 converter. The codes in 
SMS  format can be sent to any  monitoring station which  supports  the SMS reporting 
feature. Apart from the event code conversion function, the device offers the capability of 
using SMS messages or CLIP service for notification about occurrence of selected events. 

In order to execute some functions, the converter  makes use of  the features offered by 
the CLIP  service,  which enables identification of the calling party and presentation of its 
telephone number. Thus, test transmissions can be generated and sent without incurring any 
costs whatsoever. 

 

 

Fig. 1. Basic applications of the converter. 

 

1.  C

ONVERTER FEATURES

 

  Simulation of telephone monitoring station. 

  Receiving reporting codes sent in DTMF telephone format (Ademco Express or Contact ID) 

or in SIA format. 

  Conversion and retransmission of event codes to two monitoring stations. 

  Acknowledgment of event receipt: 

–  after sending SMS message (code conversion to SMS format); 

–  after  acknowledgment of event receipt by the  monitoring station (code conversion to 

GPRS transmittable form); 

–  immediately on receiving the event (SMS messaging and CLIP service). 

  Capability to automatically replace the GPRS transmission with SMS message, if there are 

problems with GPRS transmission. 

Содержание GPRS-T1





















Отзывы: