SATEL
GPRS-T1
5
Fig. 5. GPRS-T1 module in housing, secured with a plastic strap.
Note: Before you begin using the module, remove the plastic strap protecting the device
during transport. Be careful when removing the strap, so as not to damage any
components on the electronics board.
4. P
ROGRAMMING AND CONFIGURING THE CONVERTER
The GPRS-S
OFT
program is used for programming and configuring the converter.
The program is delivered free of charge with the device. Communication between the
program and the converter can be effected locally or remotely. The converter with factory
default settings can only be programmed locally.
4.1 L
OCAL PROGRAMMING THROUGH
RS-232
(TTL)
PORT
The serial COM port of the computer must be connected with the RS-232 (TTL) port on the
converter electronics board. The cables for making this connection are available as a set
designated DB9FC/RJ-KPL. Indicate in the GPRS-S
OFT
program the computer COM port to
be used for communication with the converter. To do so, click on the "Configuration" button
(see: Fig. 6 and explanations for the figure) and, in the window that will open, select one of
the available computer COM ports. After activation of the selected COM port, the program
will establish communication with the converter.
4.2 R
EMOTE PROGRAMMING USING
GPRS
TECHNOLOGY
During the remote programming of the converter, all functions that require
the use of GSM telephone will be disabled.
