14
GPRS-T1
SATEL
be repeated 5 times, but it is already received at the first attempt, the converter will not
send the other 4 transmissions).
-> SMS
– if the "Acknowledgement" field is selected and receiving the CLIP test transmission
is not acknowledged, the converter may send a "CLIP failed" SMS message to the
selected telephone number.
CLIP
CLIP starts test transmission
– if this option is enabled, it is possible to send a test
transmission with the use of CLIP service. Call the converter telephone number and after
hearing the dialing tone, hang up – the converter will identify the telephone number of
the calling party and send a test transmission according to the preprogrammed settings.
Send SMS with module status to CLIP
– if this option is enabled, it is possible to obtain
information about the converter status with the use of CLIP service. Call the converter
telephone number and after hearing the dialing tone, hang up – the converter will identify
the telephone number of the calling party and send to that number an SMS message
containing the following information:
– module name;
– version of converter software (version number and date of build);
– current level of signal received by the antenna;
– current supply voltage value.
Reaction to CLIP only when number is on list of telephones for messaging
– if this
option is enabled, the converter will only send test transmission or SMS message with
status information when the telephone number, identified owing to the CLIP service, is one
of the numbers programmed in the "GSM telephone, Monitoring stations" tab on the
"Telephone numbers for messaging and test transmissions" list.
Note: If the "Reaction to CLIP only when number is on list of telephones for messaging"
option is not enabled, the test transmissions and SMS messages with information on
device status:
−
for the numbers in the list, they will be sent by the converter immediately,
−
for the numbers not in the list, they can be sent by the converter every 10 minutes
at the most.
CLIP / SMS messaging
The GPRS-T1 converter may be used not only for reporting, but also for notification
purposes. The notification is effected by means of SMS messages, CLIP service, or both at
the same time. You can define up to 32 events and the SMS message content for each of
them. If a specified event code is received by the converter, the messaging is executed.
The CLIP / SMS messaging is functioning independently of the reporting function. It is not
available in case of the SIA format codes.
CLIP / SMS messaging
– enable this option, if the converter is to inform by means of CLIP
service/ SMS messages about receiving selected event codes.
Add partition/user/input
number to SMS
– this option refers to the event codes in
Contact ID format. If this option is enabled, the number of partition where the event
occurred and the user number or the number of input which caused the event occurrence
will be automatically added to the SMS message sent by the converter to inform about
receipt of the selected event code.
Ident.
– identifier that must be received together with the event code, so that the converter
can send an SMS message. Enter in this field 4 characters (digits or letters from A to F).
If the identifier value entered in this field is "0000", no SMS message will be sent.
