SATEL ACU-270
23
4. When the keyfob serial number is displayed in the window, click on the “OK” button. The
“New” window will close. The serial number of the new keyfob will be shown in the “S/N”
column.
Assigning new function to the keyfob button (combination of buttons)
1. Click on the field corresponding to the button (combination of buttons) to which you want
to assign a zone.
2. Enter the zone number and press ENTER to confirm.
3. Using the SPACE key enable/disable the event generating function. If the
symbol is
displayed next to the zone number, the event will not be saved after pressing the button /
combination of buttons (if no symbol is displayed, the event will be saved).
Assigning outputs to the LEDs
1. Click on the field in the “LED” column.
2. Using the keyboard, enter up to 3 digits. Each of the digits must correspond to the number
of field with output selected for confirmation (on the window right side) i.e. it can be from
the 1 to 8 range. The names of outputs in fields designated with these digits will be shown
in bold-type face.
8.1.2 Removing the APT-100 keyfob by means of the DLOADX program
1. Click on the field in “S/N” column next to the name of user whose keyfob is to be
removed.
2. Click on the “Delete” button.
3. In the window which will be displayed, click on the “Yes” button to confirm that you want to
remove the keyfob. The keyfob serial number shown in the “S/N” column will be erased.
8.2 Keyfobs in the VERSA / VERSA Plus / VERSA IP system
The functions which can be started using the keyfobs and the information that can be
presented on the LEDs are described in manuals for the VERSA / VERSA Plus / VERSA IP
control panels. After a keyfob has been added, its settings will be configured automatically,
based on the user schedule. These settings can be modified (different functions can be
assigned to the buttons / combination of buttons and different information to the LEDs).
The user manual for VERSA / VERSA Plus / VERSA IP control panels describes the
procedures for adding and editing the user by means of the keypad, during which you can
add or remove the keyfob and program its settings.
In the DLOADX program, you can add and delete keyfobs in the “Versa – Structure” window,
“Hardware” tab, after clicking on the controller name in the list of devices, and then on the
“Keyfobs” tab (Fig. 7). Before making any changes, click on the “Read” button, and after
making the changes – on the “Write” button (the data relating to keyfobs are not read after
clicking on the
button or saved after clicking on the
button in the DLOADX
program main menu).
Removal of a keyfob by means of the keypad will not erase its settings (the functions
assigned to the buttons). When added to the user, the new keyfob will have the same
settings as the deleted one.
You can remove all keyfobs, including their settings, by means of the R
EM
.ABAX
KFBS
function available in the service mode in the keypad (
2. H
ARDWARE
1. K
PDS
.
&
EXPS
.
8. R
EM
.ABAX
KFBS
).
