22 ACU-270
SATEL
For information on adding / removing keyfobs by means of the keypad please refer to the
control panel user manual.
In the DLOADX program, you can add and remove keyfobs in the “Keyfobs ABAX” window
(Fig. 6). The window opening command is available in the “Users” menu. Before making any
changes, click on the “Read” button, and after making the changes – on the “Write” button
(the data related to keyfobs are not read and saved after clicking on the
button in the
DLOADX program main menu).
Removal of a keyfob will not erase its settings (dependences between the buttons
and zones, confirmation rules, etc.). When added to the user, the new keyfob will have
the same settings as the deleted one.
You can remove all keyfobs, including their settings, by means of the R
EM
.ABAX
KEYFOB
function available in the service mode in the keypad (
S
TRUCTURE
H
ARDWARE
E
XPANDERS
R
EM
.ABAX
KEYFOB
).
8.1.1 Adding the APT-100 keyfob by means of the DLOADX program
Entering the serial number manually
1. Click on the field in the “S/N” column next to the name of the user to whom you want to
assign a keyfob.
2. Enter the keyfob serial number and confirm by pressing ENTER.
Reading the serial number during transmission
1. Click on the field in the “S/N” column next to the name of the user to whom you want to
assign a keyfob.
2. Click on the “New” button. The “New” window will open.
3. According to the command which will appear in the window, press the keyfob button.
