ACCO
SATEL
17
C
NO
NC
COM +12V
OUT2 OUT1
ITMP
+GA
SIGA
COM
BPA
LD1A LD2A DISA TMPA +GB SIGB COM
BPB
LD1B LD2B DISB TMPB
A RS485 B
IN1
IN2
IN3
IN4
IN5
CLK
DAT
COM
AC
AC
ACCO-KP-PS
COM
CKM
DTM
ACCO-KLCDR-BG
Fig. 13. Method of connecting the keypad to ACCO-KP-PS module terminals.
3.1.2 Connecting the LCD keypad to RJ socket
The method of connecting the LCD keypad communication bus to the RJ socket is shown on
Fig. 14. The socket is dedicated to connecting the LCD keypad for the duration of
programming whenever devices connected to the module do not offer the possibility of its
programming.
1 - +KPD
2 -
3 -
4 - COM
CKM
DTM
1 2 3 4
1 2 3 4
Fig. 14. Sequence of wires in the plug connecting LCD keypad with module. 1 – view of
plug in socket. 2 – view of plug from pins side.
In order to program the module, you can use any LCD keypad supported by the INTEGRA
control panels. However, such a keypad is not recommended for everyday operation of the
module because of different LED designations. The module can handle the readers in
INT-KLCDR-GR and INT-KLCDR-BL LCD keypads with firmware version 1.06 or later.
