Chapter 5 Configuring the PM135
General Meter Setup
90
PM135 Powermeter Series
Using the Front Display
Select
Setpoint Setup
menu from the
Device Setup
menu to enter the
setup menu. See
Viewing and Changing Setup Options
in Chapter 3 for
information on configuring parameters via the front display.
Use the
UP/DOWN
buttons to scroll to the required setpoint.
To select a setpoint parameter:
1.
Press
SELECT/ENTER
button to
select required setpoint.
2.
Use the
UP
/
DOWN
buttons to scroll
to the required parameter.
To change the parameter value:
1.
Press
SELECT/ENTER
button to
enter the parameter options menu.
2.
Use the
UP
/
DOWN
buttons to
select the required value.
3.
Press
SELECT/ENTER
button to
confirm the new setting
To store your new setpoint settings after you configured all
setpoint parameters:
1.
SELECT Save Setup function from
Setpoint Setup menu and press
SELECT/ENTER
button to enter
Save Setup menu
You are returned to the upper window
and can select another setpoint or exit
the menu.
2.
SELECT
Save
and
press
SELECT/ENTER
button to Save
Setpoint parameters.
Using PAS
Select
General Setup
from the
Meter Setup
menu, and then click on the
Control/Alarm Setpoints
tab.
The following table lists the available setpoint options.
Table 15: Setpoint Options
Option
Range
Description
Trigger parameter
See Appendix C
The trigger parameter that is used as an
argument in the logical expression
Operate limit
The threshold (in primary units) at which the
conditional expression would be evaluated to
true. Not applicable for digital triggers.
Device Setup
Real Time Clock
Display Setup
Basic Setup
Device Options
COM1 Setup
COM2 Setup
Setpoint Setup
