Chapter 5 Configuring the PM135
Configuring Communication Protocols
PM135 Powermeter Series
113
To view or build a DNP Class 0 response message:
1.
Select
Protocol Setup
from the
Meter Setup
menu and click on the
DNP Class 0 Points
tab.
2.
Select the object and variation type
for a point range.
3.
Specify the start point index and the
number of points in the range. Refer
to the PM135 DNP3 Reference Guide
for available data points.
4.
Repeat these steps for all point
ranges you want to be included into
the Class 0 response.
5.
Click
Send
to download your setup
to the meter.
The factory-set Class 0 point ranges are shown in the picture below.
Figure
5-23: Protocol Setup Dialog Box – DNP Class 0 Points Tab
