SATA spray master RP, Руководство по эксплуатации

Страница: 132 / 521

137
EN
Operating Instructions SATA spray master RP Operating Instructions SATA spray master RP
(address see chapter 16).
Malfunction Cause Corrective action
Jerky spray fan pat-
tern (wobbling / splut-
tering) or air bubbles
in the gravity flow cup.
Fluid tip not tightened. Tighten fluid tip with
universal spanner.
Spray pattern too
small, slanted,
one-sided or split.
Air cap holes clogged
with paint.
Clean air cap. Heed
cleaning instructions
(see chapter 10).
Damaged fluid tip
(fluid tip aperture).
Check fluid tip for any
signs of damage, re-
place nozzle set if nec-
essary.
Round / flat fan control
cannot be regulated.
Control has been
turned counterclock-
wise over the limit;
spindle loose in gun
thread.
Unscrew control with
open-end spanner;
make serviceable or
replace completely.
Spray gun does not
shut air off.
Air piston seat
clogged.
Clean air piston seat.
Heed cleaning instruc-
tions (see chapter 10).
Air piston worn. Replace air piston and
air piston packing.
Material splutters in
gravity flow cup.
Atomising air gets into
gravity flow cup via
paint channel. Fluid
tip not tightened suf-
ficiently. Air cap not
screwed on complete-
ly, air circuit clogged,
seat defective or noz-
zle set damaged.
Tighten, clean or re-
place parts.
Corrosion on air cap
thread, material pas-
sages (material con-
nection) or spray gun
body.
Cleaning solution (wa-
tery) remains in the
gun for too long.
Have gun body re-
placed. Heed cleaning
instructions (see chap-
ter 10).
Unsuitable cleaning
solution.