SATA AE1016H, Руководство пользователя

Страница: 68 / 340

68
AE1016H/AE1016H-3 ES PT JA RU EN DE KO
中文
7.1 Overview
7.1.1 General
The right auxiliary arm is a high-grade accessory of tire changer independently developed by the company and applies to the removal and
installation of the common tires of a diameter of 11"- 26" and the wide, flat and hard tires. It is featured by the follows:
- Wide scope It applies to not only the various models of tire changer produced by our company and also the models with similar fitting
conditions from the industry.
- With the excellent process performance, it may be used in conjunction with various accessories to remove and install the wide, flat and
hard tires.
- Easy and flexible operation. Accurate positioning. Efficient removal and installation of tire
7.1.2 Technical Parameters
- Air source working pressure at air inlet: 8 - 10 bar.
- Rated working pressure: 8 bar
- Turning radius of roller bracket (working arm): 677 mm
- The distance between the center of rotating axis and the
edge of tire changer: 180 mm
- Height adjustment range of working arm: 365 mm
Basic size of equipment
Height (mm) Length (mm) Width (mm) Net weight (1 kg)
1200 Max.1600 Max.1410 70
7.1.3 Working environment requirements
Working temperature 0
°
C ~ 45
°
C Relative humidity 30 ~ 95%
The site and installation location shall meet the safety requirements. The machine shall be connected to the compressed air system
according to the Instruction and well ventilated with 0.5 m -1 m clearance around to make all parts work properly without limitation. If the
machine is installed outdoors, the protective shed shall be provided to protect it from the rain and sun.