Sartorius MSA3.6P Скачать руководство пользователя

Страница: 158 / 201

158

Cubis MSA User Manual

Updating the Software

3) Upload the software update to the balance:

If you are working with User Management, it is necessary to log on as adminis-

trator.

Toggle to the System Settings menu.

Open the

7RFCVGUQHVYCTG

submenu.

You are asked if you want to delete the existing profiles.

Touch No or Yes.

Once the SD card with the current software is inserted, touch

0GZV

If the following error message appears:

9TQPI:/.XGTUKQP2NGCUGEJGEMVJGFCVC

Touch

Next

All previous data will be saved in the new format.

After updating your software, check your settings (Menu, TASK and USER).

If the XML files continue to cause problems, contact your local Sartorius service

center.

After a version check is run, the versions of the current and the new software

are displayed.

To start the update, press

%QPVKPWG

An acoustical signal will sound when the update is complete and the balance

then carries out a self test.

Audit Trail for Software Download on Models Verified for Legal
Metrology

Software Status of the Balance

Models verified for use in legal metrology are assigned an authorized software sta-

tus when the balance is shipped for delivery. This can be indicated in the display.
If something concerning the software or the legal regulations changes, the software
status must be updated.

Display Audit Trail of the Balance Software

Turn off the balance and disconnect it from the power supply.

Keep

pressed and reconnect the balance back to the power supply.

The “Bios” menu is displayed.

Press the “Settings” menu item.

Select the “Audit trail of software updates” menu item.

Select “Show audit trail.”

The Audit Trail with modification date, name, new and old software and

version number are indicated in the display.

Содержание MSA3.6P










































































































































































































Результаты поиска

Содержание MSA3.6P

Отзывы:

Похожие инструкции для MSA3.6P

Бренды по названию

Популярные бренды

Sartorius MSA3.6P, Руководство пользователя

Результаты поиска

Содержание MSA3.6P

Отзывы:

Похожие инструкции для MSA3.6P

Бренды по названию

Популярные бренды