Sartorius MA37, Руководство по эксплуатации

Страница: 8 / 69

8
Startup
Operating Instructions Moisture Analyzer MA37
Startup
Unpacking and Equipment Supplied
t
Open the packaging, making sure to remove all parts carefully .
t
After unpacking the analyzer, check it immediately for any external damage .
– If you detect any damage, proceed as directed in “Care and Maintenance .”
– Save the box and all parts of the packaging for any future transport . During
shipment, please do not leave cables plugged in!
The following parts are included in the equipment supplied:
– Moisture analyzer
– Country-specific power cable
– Pan support
– Protective cover for the control panel
– 80 disposable aluminum sample pans
– 80 glass-fiber filters
– Operating instructions
Choosing a Location
t
Select the proper setup location:
An optimal location guarantees accuracy and reliability . Ensure that the following
ambient conditions are met:
– Set up the analyzer on a stable, even surface that is not exposed to vibrations
(e .g ., weighing stone) .
– Maintain free access to the analyzer at all times .
– Make sure to choose a place where excessive heat cannot build up .
– Leave enough space between it and materials that are affected by heat .
Choose a location that is not subject to the following negative influences:
– Heat (heater or direct sunlight)
– Drafts from open windows, AC systems, and doors
– Extreme vibrations during measurement
– Heavy traffic areas (personnel)
– Extreme humidity
– Electromagnetic fields
Acclimatization
Condensation from humidity can form on the surfaces of a cold device when it is
brought into a substantially warmer area . You should therefore let a device that has
been disconnected from its power source acclimatize for approximately 2 hours
before reconnecting it to the power .