Sartorius Combics 2 CAIXS2, Руководство по эксплуатации

Страница: 4 / 180

4 Operating Instructions Combics CAIXS2
Warnings and Safety Precautions
Warnings and Safety Precautions
The Combics CAIXS2 indicator complies with the European Council Directives
as well as international regulations and standards for electrical equipment,
electromagnetic compatibility, and the stipulated safety requirements. Improper use
or handling, however, can result in damage and/or injury.
t
Read these operating instructions carefully before use.
This will prevent damage to the equipment.
Please observe safety instructions 65015-750-16 in the safety information
section.
Please also bear the following points in mind:
3
Make absolutely sure to unplug the indicator from the power before you connect or
disconnect any electronic peripheral devices to or from the interface port.
3
If you use electrical equipment in installations and under ambient conditions
requiring higher safety standards, you must comply with the provisions as specified
in the applicable regulations for installation in your country.
3
The operator shall be responsible for any modifications to the equipment and for
any connections of cables or equipment not supplied by Sartorius and must check
and, if necessary, correct these modifications and connections.
Warning when using RS-232 cables, purchased from other manufacturers:
These often have incorrect pin assignments for use with Sartorius equipment.
Connect only Sartorius accessories and options, since these are optimally designed
for use with your device. Therefore, do not use any proprietary solutions. The
operator shall be solely responsible for installation and testing of any modifications
to Sartorius equipment, including connection of cables or equipment not supplied
by Sartorius. Information on operational quality (in line with norms pertaining to
immunity) is available on request.
3
Clean your equipment only as directed in the cleaning instructions (see “Care and
Maintenance").
3
The display value can be affected by extreme electromagnetic influences. Once the
disturbance has ceased, the instrument can be used again in accordance with its
intended purpose.
Information on operational quality is available upon request from Sartorius (in line
with norms pertaining to immunity).
t
If you have any problems with your device, contact your local Sartorius office,
dealer or service center.
IP Protection
IP Rating
–
The model meets the requirements of protection class IP69K.
–
The IP65/IP69k protection rating is ensured only if the rubber gasket is
installed and all connections are fastened securely (including the caps on
unused sockets). Weighing platforms must be installed and tested by a certified
technician.