16 Entris
®
BCE Operating Instructions
Getting Started
6 Getting Started
6.1 Installing the Power Supply Unit
6.1.1 Assembling the Power Supply Unit
Item number
on packaging
Power supply unit YEPS01-15VOW with
connection cable and country-specific
power plug adapters (packed in PE bag
with printed country identification,
e.g. EU)
YEPS01-PS8
USA and Japan (US+JP), Europe and Russia
(EU+RU), Great Britain (UK), India (IN),
South Africa (ZA), Australia (AU), China (CN)
YEPS01-PS9
Argentina (AR), Brazil (BR), Korea (KR)
YEPS01-PS10
China (CN)
Procedure
t
Select the country-specific
power plug adapter . The
power plug adapter must be
suitable for use with the wall
outlet at the installation site .
t
Insert the power plug adapter
into the power supply unit .
The grooved button must be
facing upwards .
t
Push the power plug adapter as far as you can until it
clicks into place .
t
Check whether the power plug adapter is securely locked
in place by pulling it gently .
y
If the power plug adapter does
not
move: It is locked in
place .
6.1.2 Dismantling the Power Plug Adapter
Procedure
t
Press the grooved button
from above and pull back on
the power plug adapter .
t
Push the power plug adapter
out of the power supply unit
and remove it .
6.2 Connecting the Power Supply
Procedure
t
WARNING
Severe injuries caused by using defective
power supply cables! Check the power supply cable for
damage, e .g . cracks in the insulation .
t
If required: Contact Sartorius Service .
t
Check whether the country-specific power plug matches
the power connections at the installation site .
t
If required: Replace the country-specific power plug
adapter .
t
NOTICE
Damage to the device due to excessive input
voltage! Check whether the voltage specifications on the
manufacturer’s ID label match those of the power supply
at the installation site .
t
If the input voltage is too high: Do
not
connect the
device to the power supply .
t
Contact Sartorius Service .
t
Connect the right angle plug to the “Power Supply”
connection .
t
Connect the mains plug to the wall outlet (mains voltage)
at the installation site .
y
The [BOOTING] display appears in the operating display .
y
The device performs a self-test .
7 System Settings
7.1 Performing System Settings
Default settings can be adjusted for the device and the
applications in order to align with the ambient conditions
and individual operating requirements .
The following settings are necessary to operate the device
together with connected components:
− Set up the communication of the connected devices
− Set up additional components
The following settings are recommended to set up the device:
− Set the menu language
− Set the date and time
− Set the calibration and adjustment
Procedure
t
Press the [Menu] button .
t
To adjust settings: Open the desired menu .
t
Select and confirm the desired parameter (parameters,
see Chapter “7 .3 Parameter List”, page 18) .
t
Exit the menu .
