Sapling SAP Series Скачать руководство пользователя страница 16

Страница: 16 / 82

The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA

P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com

Wall Mount Installation - Round SlimLine Clock

Included in Package

Included in Wiring Kit (A-SLM-MK-S-1)

Included in Wiring Kit (A-WK-MTG-1)

Description

SAP round SlimLine
analog clock

Quantity

Picture

Mounting Piece

#6-19x7/16 screw

Strain Relief

#8x1.5 Self-tapping screw

Wall anchor

PLEASE NOTE:

A user will also have to provide a Phillips-head screwdriver, a small flat-blade screwdriver, a drill with a 1/4 inch drill bit, a pencil, a single

gang box, any equipment needed to install the gang box, at least one CAT5 or CAT6 patch cable, and any additional network cables or devices needed to
provide Power over Ethernet, and a connection to an NTP server.

If any of the items listed in the wiring kit are missing, you may contact your dealer and order a
replacement kit.

Complete the section “Preparing to Install” before mounting the clock on the wall.

Included in Gang Box Kit (A-GB-MK-1)

#6-32x1 screw

#6-19x3/8 screw

(not used)

Содержание SAP Series



















































































Результаты поиска

Содержание SAP Series

Отзывы:

Sapling SAP Series, Руководство по установке, Страница: 16 / 82

Результаты поиска

Содержание SAP Series

Отзывы: