5
4B
6
4C
18
The Sapling Company, Inc.
1633 Republic Road
Huntingdon Valley, PA 19006
USA
P. (+1) 215.322.6063
F. (+1) 215.322.8498
www.sapling-inc.com
Wall Mount Installation - Round SlimLine Clock
5) Place the mounting piece on the wall above the
gang box so that the bottom centered hole on the
piece overlaps the top hole on the gang box. Insert
a #6-32x1 screw through the bottom centered hole
and into the top hole of the gang box.
4B) Use a pencil to mark the positions of the top
two holes, then use the 1/4 inch drill bit to drill
holes at the locations of the two marks.
4C) Insert the wall anchors into the two holes,
then place the two self tapping screws through the
mounting piece and into the wall anchors. Skip step
5 and go directly to step 6.
1
2
6)
Remove the gearbox pin
, then attach the
patch cable to the port on the right side of the
movement. If the clock is able to access the Internet,
it will begin to correct itself. Make a note of the
clock’s Serial Number, which should be on a white
sticker above the port. Add this information to your
tracking chart.