Sapido WE-1530, Руководство пользователя

Страница: 55 / 308

55
1. Wireless:
Select
AP/Bridge
or
WDS
to allow or disallow the wireless operation.
2. Wireless Mode: This field indicates the 802.11g interface mode. 802.11G prevents
the 802.11b clients from accessing the router. 802.11B/G allows both 802.11b and
802.11g clients to access the router. 802.11B will enable the network as an 802.11b
wireless network. By default, the mode is 802.11B/G .
3. ESSID: You can use the default ESSID and radio channel unless more than one NES
Storage Server with BT or access point is deployed in the same area. Under this
situation, it is advised that you should use a different ESSID and radio channel for
each of NES Storage Server with BT or access point in order to distinguish from each
other. All of NES Storage Server with BTs and your wireless LAN cards must have the
same ESSID to extend the coverage of your wireless network and allow a wireless
mobile client roaming in between. By default, the ESSID is set to
Storage_Server_Router .
4. TxRate: Select the transmission rate for the network. The default setting is Auto.
5. Channel: IEEE 802.11g and 802.11b devices are direct sequence spread spectrum
devices that spread a radio signal over a range of frequencies. The range of
frequencies used by a direct sequence device is called Channel. The 802.11g and
802.11b specification supports up to 14 overlapping Channels for radio communication.
But only 11 Channels are supported in the United States and therefore built-in on NES