FREEZE AND REFRESH SETTINGS
FREEZE setting
The FREEZE function, used during sequential pan displays a still
image of the last seen surveillance location while the camera shifts
to a new location. The still image is replaced by a new image when
the camera has finished moving to a new location.
1
In the MAIN MENU, move the cursor to FREEZE, then use
the joystick lever (
d
or
c
) to select ON.
Use the joystick lever (
d
or
c
) to change the setting to “OFF”.
2
Use the joystick lever (
d
or
c
) to move the cursor to
END, then press the ENTER button.
To return to the normal screen.
REFRESH setting
If the camera unit’s horizontal rotation contact points become dirty,
panning operations may become unstable and images can be
disturbed. If used for long periods of time, the PRESET
POSITIONS can also slip from their original positions. To avoid
these kinds of situations, the REFRESH function performs a
cleaning of the contact area.
☞
In the MAIN MENU, move the cursor to REFRESH, then use
the joystick lever (
d
or
c
) to select “SET”.
The message NOW REFRESH! appears on screen and cleaning of
the horizontal contacts begins. The normal viewing screen will
reappear after cleaning has been completed.
Available settings: OFF, SET
•
OFF: Refresh function will not activate.
•
SET: Cleaning is done once manually.
MAIN MENU
LANGUAGE SET ‚
PRESET POSITION SET ‚
CAMERA SET ‚
AUTO MODE SEQ ‚
AUTO FLIP OFF
ALARM OFF
FREEZE ON
REFRESH OFF
STARTING POINT OFF
MENU END
CAMERA ADDRESS
CAMERA ADDRESS
001
001
MAIN MENU
LANGUAGE SET ‚
PRESET POSITION SET ‚
CAMERA SET ‚
AUTO MODE PAN ‚
AUTO FLIP OFF
ALARM OFF
FREEZE OFF
REFRESH SET ‚
STARTING POINT OFF
MENU END
NOW REFRESH!
NOW REFRESH!
NOW REFRESH!
CAMERA ADDRESS
001
English
– 43 –
