PART NAMES
1
2
3
4
5
6
7
8
ON
1
2
3
4
ON
1
2
3
4
5
6
7
8
9
F
H
G
1
System control setting switches
Sets baud rate and sets RS485 or coaxial control.
•
Baud rate setting
Initial setting is 19200bps. (See p00)
•
RS485 or coaxial control setting
Initial setting is coaxial control. (See p00)
2
Address setting switches
The address of the camera set here is needed for operating the
camera through a system controller. In addition, when the
camera is connected to the system, be sure to set the terminate
setting to ON when the camera is in the last connected position.
•
Address setting (See p00)
Address values can be between 0 and 127.
Initial setting is for all switches OFF.
•
Terminate setting
Initial setting is ON.
3
Power supply unit removal lever
This lever is be used to remove the power supply from the
camera unit when switch settings need to be made.
(See p00)
4
Power supply unit
5
Camera unit
6
Lens
7
Dome cover
8
Power supply cable (AC 24 V, 50Hz)
9
Video output connector (BNC)
F
Alarm input connector (10 pin)
Use for functions such as intruder detection. Connect the
supplied alarm input expansion connector to this connector and
install the alarm detection switch on the cable side.
1
Alarm input 1
6
Alarm input 5
2
Alarm input 2
7
Alarm input 6
3
Alarm input 3
8
Alarm input 7
4
Alarm input 4
9
Alarm input 8
5
GND
10 GND
G
Alarm output connector (5 pin, white)
Use for controlling peripheral equipment or supplying power to
sensors and other devices. Connect the supplied alarm output
expansion connector to this connector and use to establish
output to the cable side of the connection.
1
Alarm output 1
4
N. C
2
Alarm output 2
5
GND
3
GND
H
Camera control connector (5 pin, black)
Connect this line when controlling the camera by RS485.
Connect the supplied camera control expansion connector to
this connector and connect peripheral equipment such as a
system controller to the cable.
1
A (+)
4
B (–)
2
B (–)
5
GND
3
A (+)
1
2
3
4
ON
Baud rate (bps)
2400
4800
9600
19200
OFF
OFF
ON
ON
OFF
ON
OFF
ON
Coaxial control
RS485
ON
OFF
1
2
3
4
5
6
7
8
ON
Address setting
Terminate setting
English
– 3 –
