AUTO MODE SETTINGS
5
Tilt the joystick to the right (
c
).
“SET” will be blinking.
Note:
•
To cancel the TOUR recording, with “ON” still displayed tilt the
joystick to the left (
d
) and press the ENTER button. When the
confirmation message “OK?” appears, press the ENTER button.
•
Only one of the image tracks (TOUR 1, TOUR 2, or W) can be
set with “ON”.
“ON” indicates tour replay availability.
6
Press the ENTER button again.
The TOUR SETTING screen will appear. REC will blink,
indicating that recording has started. Use the camera’s pan
and tilt operations to record an image track. When finished
recording, press the ENTER button at the place to stop.
Recording is completed and the TOUR screen reappears.
Note:
•
“REC” will blink for 30 seconds when recording TOUR 1 or
TOUR 2, and it will blink for 60 seconds for W. Complete your
image track while REC is blinking.
•
Focus information is recorded only at the beginning of recording
or for one activation of one-push autofocus during recording.
Multiple activations of one-push autofocus during recording will
shorten the recording time.
•
If track tracing operations are still in progress when the 30 or 60
seconds have elapsed, the recording will automatically stop and
the TOUR screen will reappear.
6
Canceling a settings screen
•
Use the joystick lever (
l
) to select BACK for MENU, then
press the ENTER button. The MAIN MENU screen will
reappear.
•
To return to the normal screen, use the joystick lever (
l
c
) to select END for MENU, then press the ENTER button.
C Auto pan setting
Example: A start point and end point will be set, the time for
pausing at both the end point and at the start point
will be set to 5 seconds, panning from the start
point will be set to move to the right, and panning
speed will be set to 8 seconds.
1
In the MAIN MENU, select PAN for AUTO MODE and press
the ENTER button.
The AUTO PAN screen will appear.
2
Use the joystick lever (
d
or
c
) to select START (start
point), then press the ENTER button.
The START SETTING screen will appear.
3
Use the joystick lever (
j
l
d
c
) to decide the starting
location, then press the ENTER button.
The AUTO PAN screen will reappear and START will be
blinking.
4
Use the joystick lever (
d
or
c
) to select END (end point),
then press the ENTER button.
The END SETTING screen will appear and SET will be
blinking.
TOUR
TOUR 2
TRACE SET ‚
MENU BACK
TOUR SETTING
REC ‚
TOUR
TOUR 2
TRACE OFF ‚
ENTER
AUTO PAN
POSITION START‚
PAUSE TIME 3S
DIRECTION LEFT
[PAN SPEED]
7
MENU BACK
ENTER
START SETTING
SET ‚
START SETTING
SET ‚
AUTO PAN
POSITION START‚
PAUSE TIME 3S
DIRECTION LEFT
ENTER
END SETTING
END SETTING
SET
SET ‚
END SETTING
SET ‚
AUTO PAN
POSITION END ‚
PAUSE TIME 3S
DIRECTION LEFT
English
– 37 –
