CAMERA SETTINGS
White balance additional settings (2)
ATW setting
Automatic white balance settings are completed when ATW is
selected. However, white balance will not be suitably adjusted if a
bright light source from the environment is in the image. In this
case, the bright light source should be masked so that it will not be
detected.
1
Use the joystick lever (
j
or
l
) to move the cursor to
ATW for WHITE BALANCE. Then press the ENTER button.
The ATW SETTING screen will appear.
2
Use the joystick lever (
j
or
l
) to select ON for
MASKING, then press the ENTER button.
The ATW MASKING screen will appear with the mask pattern
blinking in the upper right corner of the screen.
3
Use the joystick lever (
j
l
d
c
) to move the mask
pattern over the bright light source, then press the ENTER
button.
Use the same steps to place addition masks as needed.
Note: Initial settings place no masks on the screen. To cancel the
placement of masks, press the ENTER button again.
4
Use the joystick lever (
j
or
l
) to move a mask pattern to
the bottom area of the screen and continue holding the
joystick lever straight down for 3 seconds.
The PRESET and MENU items will appear on the screen. Use
the joystick lever (
j
or
l
) to select BACK, then press the
ENTER button. The ATW SETTING screen will reappear.
☞
SMART ATW setting
If saturation is high or a scene is bright, the most suitable colors
may not be obtained. In this case, set the SMART ATW to ON.
Use the joystick lever (
j
or
l
) to move the cursor to SMART
ATW, then use the joystick lever (
d
or
c
) to set ON.
5
Canceling a settings screen
••••
Use the joystick lever (
l
) to select BACK for MENU, then
press the ENTER button. The VIEW SETTING screen will
reappear.
••••
To return to the normal screen, use the joystick lever (
l
c
) to select END for MENU, then press the ENTER button.
ENTER
VIEW SETTING 1
IRIS AUTO ‚
WHITE BALANCE ATW ‚
SHUTTER OFF
MOTION OFF
APERTURE ON ‚
ENTER
ATW SETTING
MASKING ON ‚
SMART ATW OFF
ENTER
ATW MASKING
CONTINUE (ñ)
ATW MASKING
CONTINUE (ñ)
ENTER
ATW SETTING
MASKING ON ‚
SMART ATW ON
PRESET OFF
MENU BACK
ATW SETTING
MASKING ON ‚
SMART ATW ON
PRESET OFF
MENU BACK
English
– 27 –
