Sanyo VCC-9000EBCP/EBSP, Инструкция по эксплуатации

Страница: 31 / 49

- 30 - English
PAN AND TILT SETTINGS
C
Lens starting point position
setting (SET NORTH)
This stores the starting point for the direction of the camera
lens, so that when the power is turned on, the camera moves
straight to the set starting point.
1
Move the joystick lever so that the camera
lens faces in the required direction.
2
Select “SET NORTH”, and then tilt the
joystick lever to
c
.
“ ...... ” will flash and the current camera lens
direction will be stored, and that position will become
“north”.
The pan position stored in the “SET NORTH” setting will
be at “0”.
3 Select “BACK”, and then tilt the joystick
lever to
c
to complete the setting.
When “DIRECTION” in the “DISPLAY CONFIGURATION”
system setting is set to “ON”, the direction and angle of the
camera lens will be displayed.
(Display example)
* Pan angle of “0” is directly due north.
Direction display for different pan angles
Tilt angle 0–90
AUTO STOP IDLE :020
PROPORTIONAL PAN:ON
·SET NORTH......
BACK
Direction screen display
Direction Pan range Direction Pan range
N 331–30 S 151–210
NE 31–60 SW 211–240
E 61–120 W 241–300
SE 121–150 NW 301–330
N 331 30 X1
N 331 30
Direction* Pan angle Tilt angle
30
60
120
150 210
240
300
330
N
S
NE NW
SE SW
E W
) ! "#$%&'